Clean Room Air Shower

Supply filter

Imported Minipleat HEPA filter with hot melt technology, which conforms to EU-14 Grade at supply position with an efficiency rating better than 99.999% for 0.3 micron

Pre-filter

Pre-filters are made from Non-woven synthetic with HDPE mesh; conforms to EU-06 Grade, with an efficiency rating better than 95% down to 5 micron

Motor Blower assembly

Motor blower designed of statically"and dynamically balanced for supply of sufficient Capacity and static pressure to take care of airflow requirement for entire life of HEPA.

Pressure Gauge

Dwyer Make Magnehelic Gauge (0 -25 mm: 1 Nos.) to monitor pressure drop across HEPA.

Lighting

Fluorescent Light (250 Lux) at work surface

ON/OFF Switches

SS ON/OFF Switches for motor & lights

Switch Socket

6/15 Amp single-phase switch socket use for external equipment

Control System

Interlocking system to ensure that both the doors cannot open at the same time & to ensure that both the doors stay locked during the time of air flow.

Time setting for Air shower

Time setting for air shower operation time (settable for 30 seconds to 5 minutes)

Emergency Operation

Emergency Stop will be provided

Door Opening

Straight entry Straight exit and 90 degree door opening

Operation Mode

Automatic as well as manual mode

DOP Port

DOP test port at upstream of HEPA filter integrity test. ( With PAO Solution)

Door

SS 304 doors with double walled flush glass view panels and door closer

Electric Supply

230V AC 1-  50HZ / 415V AC 3-  50HZ

Noise Level

Less than 67 dB on Scale   when Ambient is not greater than 55 dB on Scale  

Vibration Level

Minimum